Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Module type | F-PM-E 24 V DC/8 A PPM ST |
| System context | SIPLUS ET 200SP |
| Supply voltage | 24 V DC rated; 20.4 V to 28.8 V DC permissible |
| Safe digital inputs | 2 |
| Safe digital output | 1 |
| Output current | 8 A rated value |
| Output switching capacity | 8 A max. with resistive load |
| Protocol | PROFIsafe |
| Diagnostics | Diagnostic alarm; RUN, ERROR, PWR, channel-status and DIAG LEDs |
| Isolation | Between channels and backplane bus; tested with 707 V DC (type test) |
| BaseUnit | BU type C0 |
| Operating temperature | -30…+60 °C |
Applications
- Safe shutdown of DQ and F-DQ: Provides 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3.
- Safe digital signal handling: Uses 2 safe digital inputs and 1 safe digital output for fail-safe signal handling.
Key Features
- Fail-safe power module: F-PM-E 24 V DC/8 A PPM ST with PROFIsafe and conformal coating; based on 6ES7136-6PA00-0BC0.
- Safe I/O channels: Has 2 safe digital inputs and 1 safe digital output.
- Safe shutdown: Provides 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3.
- Supply voltage: Rated supply voltage: 24 V DC; permissible range: 20.4 V to 28.8 V DC; reverse polarity protection: Yes.
- Output protection and load: The output has short-circuit and overload protection, with 8 A rated output current and 8 A maximum switching capacity with resistive load.
- Diagnostics and isolation: Has diagnostic alarms, RUN, ERROR, PWR, channel-status and DIAG LEDs; isolation between channels and the backplane bus is tested with 707 V DC (type test).
Frequently Asked Questions
1. What type of module is 6AG1136-6PA00-2BC0?
It is an F-PM-E 24 V DC/8 A PPM ST fail-safe power module with PROFIsafe for SIPLUS ET 200SP.
2. How many safe I/O channels does the module have?
It has 2 safe digital inputs and 1 safe digital output.
3. What supply voltage does it require?
The rated supply voltage is 24 V DC, with a permissible range of 20.4 V to 28.8 V DC.
4. What output current is available?
The rated output current is 8 A. The maximum current per channel and per module is 8 A; derating data in the manual applies.
5. What should be verified before requesting a quote?
Verify the required BU type C0 BaseUnit, PROFIsafe use, mounting conditions, and the applicable output-current derating data in the manual.
