Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Product type | IM 155-6 PN HS |
| Supported ET 200SP modules, max. | 30 |
| Submodules per station, max. | 125 |
| Supply voltage, rated (DC) | 24 V |
| Permissible supply voltage range (DC) | 19.2 V to 28.8 V |
| PROFINET interfaces | 1; 2 ports (switch) |
| Transmission procedure | 100BASE-TX |
| BusAdapter | BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ/RJ45, BA SCRJ/FC, BA 2x LC, BA LC/RJ45, BA LC/FC |
| Firmware version | V4.0 |
| Isochronous mode | Yes; shortest clock pulse 125 μs; maximum cycle 4 ms |
| Current consumption, max. | 500 mA |
Applications
- PROFINET IO device communication: The module supports operation as a PROFINET IO device.
- Open IE communication: The module supports Open IE communication over TCP/IP.
- Media-redundant communication: The module supports MRP and MRPD media redundancy.
- Isochronous communication: The module supports isochronous mode and IRT communication.
Key Features
- PROFINET interface module: Product type designation: IM 155-6 PN HS. PROFINET IO device and Open IE communication are supported.
- ET 200SP module capacity: Up to 30 operable ET 200SP modules and up to 125 submodules per station.
- PROFINET interfaces: 1 PROFINET interface with 2 switch ports through a BusAdapter; 100BASE-TX transmission.
- Supply and protection: Rated supply voltage: 24 V DC. The permissible range is 19.2 V to 28.8 V DC, with reverse-polarity and short-circuit protection.
- Isochronous operation: Isochronous mode and IRT are supported. The shortest clock pulse is 125 μs, maximum cycle is 4 ms, and maximum jitter is 0.25 μs.
- Diagnostics and hot swapping: Status indicators, alarms, diagnostics, RUN, ERROR, MAINT and PWR LEDs are provided. Multi-hot swapping is supported during operation.
Frequently Asked Questions
1. What is the function of Siemens 6ES7155-6AU00-0DN0?
It is a SIMATIC ET 200SP PROFINET interface module, product type IM 155-6 PN HS, supporting PROFINET IO device and Open IE communication.
2. How many ET 200SP modules can this interface module operate?
It can operate up to 30 ET 200SP modules and up to 125 submodules per station.
3. What PROFINET connections does it provide?
It provides 1 PROFINET interface with 2 switch ports through a BusAdapter and supports 100BASE-TX.
4. What supply voltage does the module require?
The rated supply voltage is 24 V DC, with a permissible range of 19.2 V to 28.8 V DC.
5. Does the module support hot swapping and diagnostics?
Yes. Multi-hot swapping, status indicators, alarms and diagnostics are supported, with RUN, ERROR, MAINT and PWR LEDs.
