Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Rated power, low overload | 1.10 kW | 1.50 hp |
| Rated power, high overload | 0.75 kW | 1.00 hp |
| Input voltage | 3 AC, 380 … 480 V +10 % -20 % |
| Line frequency | 47 … 63 Hz |
| Communication | PROFINET, EtherNet/IP |
| Standard digital inputs | 6 |
| Digital outputs | 1 relay changeover contact; 1 transistor |
| Analog input | 1 differential input, 10 bit |
| Analog output | 1 non-isolated output |
| Output frequency for vector control | 0 … 240 Hz |
| Output frequency for V/f control | 0 … 550 Hz |
| Degree of protection | IP20 / UL open type |
Applications
- Drive control: Supports V/f linear, square-law, and parameterizable control; V/f with flux current control (FCC); V/f ECO linear and square-law control; and sensorless vector control.
Key Features
- Drive rating: Rated power: 1.10 kW at low overload and 0.75 kW at high overload.
- Input and output: Input: 3 AC, 380 … 480 V +10 % -20 %, 47 … 63 Hz. Output: 3 AC, 400 V IEC | 480 V NEC.
- I/O interface: Unfiltered external 24 V I/O interface with 6DI, 2DO, 1AI, 1AO, and 1 Mot_t Safe Torque Off.
- Communication: Communication: PROFINET, EtherNet/IP.
- Connections: Line-side, motor-end, and DC-link connections use plug-in screw terminals. PE connection is on the housing with an M4 screw.
- Form factor and protection: Frame size: FSAA. Dimensions: 73 mm width and 160 mm depth. Degree of protection: IP20 / UL open type.
Frequently Asked Questions
1. What is the rated power of 6SL3210-1KE13-2UF2?
Rated power is 1.10 kW at low overload and 0.75 kW at high overload.
2. Which I/O channels does this SINAMICS G120C provide?
It provides 6 standard digital inputs, 1 fail-safe digital input, 1 relay changeover contact, 1 transistor output, 1 differential analog input, and 1 non-isolated analog output.
3. Which communication interfaces are supported?
Communication: PROFINET and EtherNet/IP.
4. What terminals and PE connection are provided?
Line-side, motor-end, and DC-link connections use plug-in screw terminals. The PE connection is on the housing with an M4 screw.
