Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Product type | DQ 8×230 V AC/2A ST (triac) |
| Digital outputs | 8 |
| Output type | Triac |
| Rated output voltage | 230 V; 120/230 V AC, 50/60 Hz |
| Rated signal "1" output current | 2 A |
| Maximum resistive-load switching capacity | 2 A |
| Maximum lamp-load switching capacity | 50 W |
| Maximum switching frequency, resistive load | 10 Hz |
| Output delay, resistive load | 1 AC cycle for "0" to "1" and 1 AC cycle for "1" to "0" |
| Isolation tested with | 3 100 V DC |
Applications
- Digital output control: Controls digital loads through 8 parameterizable triac outputs with a 230 V AC rated output voltage.
- Redundant load control: Supports parallel switching of two outputs for redundant control of a load.
- Substitute-value operation: Provides connectable substitute values for output operation.
Key Features
- 8-channel triac output: Digital output module with 8 current-sourcing, parameterizable triac outputs.
- 230 V AC output: Rated output voltage: 230 V; 120/230 V AC, 50/60 Hz.
- Output current limits: Rated signal "1" output current: 2 A. For resistive load, maximum switching capacity is 2 A; above +60 °C, up to 8 outputs can be controlled simultaneously at 0.25 A each, with maximum total current of 2 A per group.
- Substitute values and status LEDs: Substitute values are connectable. RUN and channel status use green LEDs; ERROR and module diagnostics use red LEDs.
- Isolation and mounting data: Channels are electrically separated in groups of 1, and channels are separated from the backplane bus and load voltage L1. Packaging dimensions are 15.40 x 15.00 x 4.50 cm.
- Firmware and operating functions: Firmware updates are possible. I&M0 to I&M3 data, prioritized startup, MSO, and an integrated operating cycle counter are supported; the counter requires FW V2.3.0 or higher.
Frequently Asked Questions
1. What output type and channel count does 6AG1522-5FF00-7AB0 have?
It has 8 current-sourcing, parameterizable triac digital outputs.
2. What output voltage and current are supported?
The rated output voltage is 230 V; 120/230 V AC, 50/60 Hz. The rated signal "1" output current is 2 A, with 2 A maximum for a resistive load.
3. Does the module provide diagnostics?
It has no diagnostics function, diagnostic alarm, supply-voltage monitoring, wire-break monitoring, or short-circuit monitoring. It has RUN, ERROR, channel status, and module diagnostic LEDs.
4. Are the outputs isolated?
Yes. The channels are separated in groups of 1, and the channels are separated from the backplane bus and load voltage L1.
