Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Product type | DQ 8x24VDC/0,5A SNK BA |
| Digital outputs | 8 sink outputs (NPN) |
| Rated supply voltage | 24 V DC |
| Permissible supply voltage | 19.2 V to 28.8 V DC |
| Rated output current | 0.5 A per channel |
| Current per module, max. | 4 A |
| Output delay, max. | 300 μs from "0" to "1"; 600 μs from "1" to "0" |
| Switching frequency, max. | 100 Hz with resistive load |
| Diagnostics | Diagnostics, diagnostic alarm, group error, and supply-voltage monitoring: Yes |
| Isolation | Between channels and backplane bus: Yes; isolation tested with 707 V DC (type test) |
| BaseUnit | BU type A0 |
Applications
- Digital output control: The module controls digital inputs through its digital outputs.
- Redundant load control: Two outputs can be switched in parallel for redundant control of a load; parallel switching is not supported for uprating.
Key Features
- 8-channel sink output: The module has 8 parameterizable digital sink outputs (NPN) and supports current-sinking operation.
- 24 V DC electrical data: Rated supply voltage is 24 V DC, with a permissible range of 19.2 V to 28.8 V; rated output voltage is 24 V DC.
- 0.5 A output current: Rated output current for signal "1" is 0.5 A per channel; current per module is maximum 4 A.
- Diagnostics and status indication: The module has diagnostics, diagnostic alarms, supply-voltage monitoring, group error reporting, a green PWR LED, green channel-status LEDs, and a green/red DIAG LED.
- Output timing and switching: With resistive load, maximum output delay is 300 μs from "0" to "1" and 600 μs from "1" to "0"; maximum switching frequency is 100 Hz.
- Installation and protection: It has short-circuit protection, automatic encoding, a type B mechanical coding element, and isolation between the channels and backplane bus.
Frequently Asked Questions
1. How many digital outputs does Siemens 6AG1132-6BF61-7AA0 have?
It has 8 parameterizable digital sink outputs (NPN).
2. What supply voltage does this module use?
The rated supply voltage is 24 V DC, with a permissible range of 19.2 V to 28.8 V DC.
3. What output current is available per channel?
The rated output current for signal "1" is 0.5 A per channel, and the maximum current per module is 4 A.
4. What diagnostics are available?
Diagnostics, diagnostic alarms, supply-voltage monitoring, group error reporting, a green PWR LED, green channel-status LEDs, and a green/red DIAG LED are available.
