Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Input supply | 3 AC, 380 … 480 V +10 % -20 %, 47 … 63 Hz |
| Rated power, low overload | 1.10 kW | 1.50 hp |
| Rated power, high overload | 0.75 kW | 1.00 hp |
| Digital inputs | 6 standard digital inputs and 1 fail-safe digital input |
| Digital outputs | 2 |
| Analog inputs | 1 differential input, 10 bit resolution |
| Analog outputs | 1 non-isolated output |
| Communication | USS/MODBUS RTU |
| Safe function | Safe Torque Off integrated |
| Protection | IP20 / UL open type |
| Frame size | FSAA |
Applications
- Drive control: Supports V/f and sensorless vector control techniques for drive control.
Key Features
- Drive ratings: Rated power is 1.10 kW | 1.50 hp for low overload and 0.75 kW | 1.00 hp for high overload.
- I/O configuration: The interface has 6 standard digital inputs, 1 fail-safe digital input, 2 digital outputs, 1 differential analog input and 1 non-isolated analog output.
- Communication: Communication uses USS/MODBUS RTU.
- Control techniques: Supported techniques include V/f linear / square-law / parameterizable, V/f with flux current control (FCC), V/f ECO linear / square-law and sensorless vector control.
- Connections and mounting: Plug-in screw terminals are provided on the line side, motor end and DC link for a braking resistor. Frame size is FSAA; dimensions are 73 mm width and 155 mm depth.
- Protection and cooling: The drive has IP20 / UL open type protection and air cooling using an integrated fan.
Frequently Asked Questions
1. What is the rated power of Siemens 6SL3210-1KE13-2UB2?
Rated power is 1.10 kW | 1.50 hp for low overload and 0.75 kW | 1.00 hp for high overload.
2. Which I/O does this SINAMICS G120C drive provide?
It has 6 standard digital inputs, 1 fail-safe digital input, 2 digital outputs, 1 differential analog input with 10 bit resolution and 1 non-isolated analog output.
3. Which communication protocol is supported?
Communication uses USS/MODBUS RTU.
4. How is the drive connected?
The line side, motor end and DC link for a braking resistor use plug-in screw terminals. The PE connection is on the housing with an M4 screw.
