Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Analog input channels | 2 |
| Supported current range | 4 mA to 20 mA on 50 ohms |
| Rated load voltage L+ | 24 V; From power module |
| Resolution with overrange | 13 bit including sign; 4 to 20 mA: 13 bit |
| Conversion time per channel | 65 ms; 55 / 65 ms |
| Diagnostics | Wire break, Group error, and overflow/underflow; Group error SF (red) LED |
| Integration time | 16,7 / 20 ms |
| Power loss, typ. | 0.6 W |
| Address space per module, max. | 4 byte |
| Conformal coating | -25…+60 °C |
Applications
- Current measurement with 2-wire transducer: The module supports current measurement using a 2-wire transducer with a maximum transmitter burden of 750 Ω.
Key Features
- 2 analog inputs: The module has 2 analog inputs for current measurement.
- 4 mA to 20 mA input range: The rated input range is 4 mA to 20 mA on 50 ohms.
- Resolution and conversion: Resolution with overrange is 13 bit including sign; conversion time per channel is 65 ms, with 55 / 65 ms also specified.
- Signal diagnostics: Diagnostics include wire break, Group error, and overflow/underflow; Group error SF is indicated by a red LED.
- 24 V supply and protection: Rated load voltage L+ is 24 V from the power module. Reverse polarity protection is provided, with a destruction limit of 35 mA per channel.
- Conformal coating and isolation: The module has conformal coating. Analog inputs are isolated from the backplane bus and tested at 500 V DC, but are not isolated between channels.
Frequently Asked Questions
1. How many analog inputs does Siemens 6AG1134-4GB01-2AB0 have?
It has 2 analog inputs.
2. Which current signal range does the module support?
It supports 4 mA to 20 mA on 50 ohms.
3. What diagnostics are available?
Diagnostics include wire break, Group error, and overflow/underflow. Group error SF is shown by a red LED.
4. What supply does the module require?
Rated load voltage L+ is 24 V from the power module.
5. What isolation details should be verified before inquiry?
The analog inputs are isolated from the backplane bus, not isolated between channels, and not isolated from load voltage L+. Isolation is tested with 500 V DC.
