Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Digital output type | Transistor |
| Number of digital outputs | 2 |
| Rated load voltage L+ | 24 V DC; From power module |
| Rated output current for signal "1" | 2 A |
| Permissible output current for signal "1" | 7 mA to 2.4 A |
| Output delay, "0" to "1" | 100 μs maximum with resistive load |
| Output delay, "1" to "0" | 400 μs maximum with resistive load |
| Diagnostics | Wire break and short-circuit, channel by channel |
| Ambient operating temperature | -25 °C to 70 °C |
Applications
- Redundant load control: The two outputs can be switched in parallel for redundant control of a load, per module.
- Digital input control: The outputs can control a digital input.
Key Features
- Digital outputs: 2 transistor digital outputs with short-circuit protection and a typical 4 A response threshold.
- Load voltage: Rated load voltage L+ is 24 V DC, supplied from the power module.
- Output current: For signal "1", the rated output current is 2 A, with a permissible range of 7 mA to 2.4 A.
- Diagnostics: Wire-break and short-circuit diagnoses are available channel by channel; the red group error SF LED and green digital-output status indicators are available.
- Isolation and installation: The digital outputs are isolated from the backplane bus but not between channels. Dimensions are 15 mm × 81 mm × 52 mm, and approximate weight is 40 g.
- Environmental design: Conformal coating is supplied with an ambient operating temperature range of -25 °C to 70 °C and maximum installation altitude of 5 000 m.
Frequently Asked Questions
1. How many digital outputs does the 6AG1132-4BB31-7AB0 have?
It has 2 transistor digital outputs.
2. What load voltage does this module use?
The rated load voltage L+ is 24 V DC from the power module.
3. What output current is available for signal "1"?
The rated output current is 2 A, with a permissible range of 7 mA to 2.4 A.
4. What diagnostics are available?
Wire-break and short-circuit diagnoses are available channel by channel, with a red group error SF LED and green digital-output status indicators.
5. What should be verified before inquiry?
Verify the 15 mm × 81 mm × 52 mm dimensions, 40 g approximate weight, 24 V DC load voltage, and the required installation conditions.
