Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Digital output type | Source output (PNP, current-sourcing) |
| Digital output channels | 2 |
| Rated load voltage | 24 V DC; From power module |
| Rated output current | 0.5 A |
| Output current permissible range | 7 mA to 600 mA for signal "1" |
| Load resistance range | 48 Ω to 3 400 Ω |
| Switching frequency | 100 Hz with resistive load; 2 Hz with inductive load; 10 Hz on lamp load |
| Total output current | 1 A per module, max. |
| Isolation | Between the digital output channels and backplane bus; tested with 500 V DC |
Applications
- Digital input control: The digital outputs can control a digital input.
- Redundant load control: The two outputs support redundant control of a load, per module.
Key Features
- Digital outputs: 2 source outputs (PNP, current-sourcing) with a 0.5 A rated output current for signal "1".
- Load voltage: Rated load voltage: 24 V DC from the power module, with reverse voltage and reverse polarity protection.
- Output protection: Short-circuit protection is provided; output status indication uses green LEDs.
- Output timing: Output delay with resistive load: "0" to "1", max. 200 μs; "1" to "0", max. 1.3 ms.
- Module dimensions: 15 mm width, 81 mm height, and 52 mm depth; approximate weight: 40 g.
- Packing unit: 5 electronic modules per packing unit; the collected description identifies this as a spare part.
Frequently Asked Questions
1. How many digital outputs does Siemens 6ES7132-4BB01-0AA0 have?
It has 2 source digital outputs (PNP, current-sourcing).
2. What load voltage and output current does it use?
The rated load voltage is 24 V DC from the power module, and the rated output current is 0.5 A for signal "1".
3. What switching frequencies are supported?
The maximum switching frequency is 100 Hz with resistive load, 2 Hz with inductive load, and 10 Hz on lamp load.
4. What cable lengths are specified?
The maximum cable length is 1 000 m when shielded and 600 m when unshielded.
