Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Module type | PotDis BU type P2, dark version |
| P1 potential connections | 1 |
| P2 potential connections | 17 |
| Maximum voltage for P1 and P2 bus | 48 V DC |
| Maximum voltage for process terminals | 48 V DC |
| Maximum current-carrying capacity for P1 and P2 bus | 10 A |
| Maximum current-carrying capacity for process terminals | 10 A |
| Terminal type | Push-in terminal |
| Conductor cross-section | 0.14 mm2 to 2.5 mm2 |
| Potential separation | Between backplane bus and supply voltage: Yes |
| Isolation test | 3 250 V DC |
Key Features
- Potential distributor type: PotDis BU type P2, dark version, for SIMATIC ET 200SP.
- Potential connections: 1 P1 potential and 17 P2 potentials; 18 terminals connect to the P1 and P2 bus.
- Rail bridging: P1, P2, and AUX rails are bridged to the left base unit; no new potential group is formed.
- Voltage and current: P1 and P2 bus and process terminals: 48 V DC maximum and 10 A maximum current-carrying capacity.
- Terminals and dimensions: Push-in terminals accept conductors from 0.14 mm2 to 2.5 mm2. Dimensions are 15 mm W x 117 mm H x 35 mm D.
- Electrical isolation: Potential separation exists between the backplane bus and supply voltage; isolation is tested with 3 250 V DC.
Frequently Asked Questions
1. What type of potential distributor is 6ES7193-6UP00-0BP2?
It is a PotDis BU type P2, dark version, for SIMATIC ET 200SP.
2. How many P1 and P2 potential connections does it have?
It has 1 P1 potential and 17 P2 potentials, with 18 terminals connected to the P1 and P2 bus.
3. What terminals and conductor sizes does it use?
It has Push-in terminals for conductors from 0.14 mm2 to 2.5 mm2.
4. What voltage and current limits apply?
The P1 and P2 bus and process terminals support 48 V DC maximum; each has a 10 A maximum current-carrying capacity.
