Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Module type | SIPLUS ET 200S EM 2AQ U analog output module based on 6ES7135-4FB01-0AB0 |
| Analog output channels | 2 |
| Voltage output ranges | 1 V to 5 V; -10 V to +10 V |
| Rated load voltage | 24 V DC; from power module |
| Maximum resolution | 14 bit; 1 to 5 V: 12 bit, ±10 V: 13 bit + sign |
| Maximum cycle time | 1.5 ms; all channels |
| Short-circuit protection | Yes; voltage output |
| Minimum load impedance | 1 kΩ; voltage outputs, in rated range of output |
| Maximum capacitive load | 1 μF; voltage outputs, in rated range of output |
| Operating ambient temperature | -25 °C to 60 °C |
| Product lifecycle | Product cancellation |
Applications
- Voltage signal output: Provides 2 analog voltage outputs in the supported 1 V to 5 V and -10 V to +10 V ranges.
- Actuator connection: Supports two-wire voltage-output actuator connection without compensation of line resistances and four-wire voltage-output actuator connection.
Key Features
- Analog voltage outputs: Has 2 analog outputs with voltage output and short-circuit protection.
- Supported output ranges: Supports 1 V to 5 V and -10 V to +10 V voltage output ranges.
- Load voltage: Rated load voltage is 24 V DC from the power module, with reverse polarity protection.
- Resolution and cycle time: Maximum resolution with overrange is 14 bit; 1 to 5 V provides 12 bit and ±10 V provides 13 bit + sign. Maximum cycle time for all channels is 1.5 ms.
- Diagnostics and isolation: Provides short-circuit and group error diagnostics, with a red group error SF LED. The analog outputs are isolated from the backplane bus and load voltage L+, but not between channels.
- Installation and environmental data: Dimensions are 15 mm wide, 81 mm high, and 52 mm deep; weight is approximately 40 g. Ambient temperature during operation is -25 °C to 60 °C, and the module has conformal coating.
Frequently Asked Questions
1. How many analog outputs does Siemens 6AG1135-4FB01-2AB0 have?
It has 2 analog outputs.
2. Which voltage ranges does this module support?
It supports 1 V to 5 V and -10 V to +10 V voltage output ranges.
3. What supply does the module require?
The rated load voltage is 24 V DC from the power module, with reverse polarity protection.
4. What diagnostics are available?
Short-circuit and group error diagnostics are available, with a red group error SF LED.
