Product Overview
Technical Summary
| Parameter | Value |
|---|---|
| Motor type | Permanent-magnet synchronous motor; High Dynamic |
| Rated power | PN=2 kW |
| Rated speed | 4,500 rpm (100 K) |
| Rated torque | 4.3 Nm (100 K) |
| Supply voltage | UDC=600 V |
| Encoder | AM20DQI absolute encoder, 20 bits + 12 bits multiturn, DRIVE-CLiQ interface |
| Mounting | IM B5 (IM V1, IM V3), flange 1 |
| Connector | M23; rotatable signal and power connectors |
| Cooling | Natural cooling |
| Protection | IP64 |
| Holding brake | Without holding brake |
Key Features
- Motor performance: PN=2 kW, rated speed 4,500 rpm, rated torque 4.3 Nm (100 K), and maximum torque 17.3 Nm.
- Absolute encoder: Encoder AM20DQI with 20 bits absolute resolution 1048576 and 12 bits multiturn for a traversing range of 4096 revolutions, with DRIVE-CLiQ interface.
- Mounting and shaft: IM B5 design (IM V1, IM V3), flange 1, and shaft with fitted Feather key, tolerance N.
- Connections: M23 electrical connectors for signals and power; the connectors are rotatable.
- Cooling and protection: Natural cooling and degree of protection IP64.
- Brake and monitoring: Without holding brake; temperature monitoring uses a Pt1000 temperature sensor.
Frequently Asked Questions
1. What motor type and power does the 1FK7061-4CH71-1RA0 have?
It has a permanent-magnet synchronous motor design, PN=2 kW, and High Dynamic motor type.
2. What encoder is installed on this motor?
It has an AM20DQI absolute encoder with 20 bits absolute resolution 1048576, 12 bits multiturn over 4096 revolutions, and a DRIVE-CLiQ interface.
3. Which mounting and connectors does it use?
It uses IM B5 mounting (IM V1, IM V3), flange 1, and rotatable M23 connectors for signals and power.
4. Does the configuration include a holding brake?
It is without holding brake.
